Stainless Steel Sheet, Coil and Plate

Stainless Steel Sheet, Coil and Plate

    
          Hairline                      Bordes                      Mirror             Perforated Plate         Coil Plate
Product Stocking and Processing

Stainless Steel Sheet, Coil & Strip
Grade
304, 304/304L, 316, 316/316L, 2205, 4003/AtlasCR12, 4003Ti/AtlasCR12Ti
Thickness (mm)
0.45 to <5.0
Width (mm)
914, 1219, 1500, 2000, Customer specific strip
Length (mm)
1829, 2438, Customer specific cut-to-length
Finish
2B, No.4, BA, No.1 (HRAP), Customer specific polish
Standard coating
Paper interleaf, PE
Optional coating
Laser, Deep drawing PVC
Plasma profiles
To customer drawings

Stainless Steel Plate
Grade
304/304L, 316/316L, 4003/AtlasCR12, 2205, 253MA
Thickness (mm)
5.0 to 50.0
Width (mm)
1250 (grade 4003), 1500, 2000, 2500
Length (mm)
3000, 6000, Customer specific cut-to-length
Finish
2B (to 8mm), No.1 (HRAP)
Plasma profiles
To customer drawings

Specification
ASTM A240M. Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and for general applications.

ASTM 480M. General requirements for flat rolled stainless and heat-resisting steel plate sheet and strip.

Product Finish
Product
Product process
Description
Abbreviation
Hot rolled
Hot rolled, annealed and pickled.
Condition and finish preferred for corrosion-resisting and heat-resisting applications. Typically available in thickness 5mm and above.
No. 1 or HRAP
Cold rolled
Hot rolled, annealed, descaled, cold rolled, annealed, pickled, final skin pass rolled.
Smooth finish achieved by cold rolling, then annealing and pickling, followed by skin pass rolling. Typically available in thickness up to 8mm.
2B

Stainless steel flat product produced from coil
The internationally recognised crossover thickness between what is referred to as sheet and plate is 5.0mm. This is specified in ASTM A480M. Therefore, sheet thickness is less than 5.0mm and plate is 5.0mm and over.

Surface finishes
Finish
Description
2B
The general-purpose, cold rolled, smooth finish obtained as a result of a final light pass through polished rolls at the mill.
BA
Bright annealed finish is a bright, cold rolled, highly reflective finish retained by final annealing in a controlled atmosphere furnace. The finish has large application in the appliance and automotive industry and as a decorative finish in architecture. The brightness and reflectivity is a function of thickness and grade. Consultation is recommended prior to specification in architectural applications. BA finish is usually supplied with a PE or PVC coating as a surface protection.
No. 4
Produced from 2B finish often by a service centre rather than the production mill. It is a general-purpose ground polished finish used widely for kitchen equipment and applications requiring a decorative linished finish. No.4 finish is usually supplied with a PE coating as a surface protection.
No.8
Highly reflective 'mirror' finish. Produced from 2B finish by polishing with successive finer abrasives following by extensive buffing. Mainly used in architectural applications.
Customer-specific
A service centre with polishing equipment can produce special finished for specific applications.

Stainless Steel Sheet, Coil and Plate Product Specifications
The following is a list of the standard specifications commonly referred to covering the production and processing of stainless steel sheet, coil and plate. It is not an exhaustive list and generally covers only American and European standards.
Major stainless steel producing countries usually have their own standards numbering system and often product with similar characteristics has a different standard number depending on the country of manufacture.
Standard
Description
ASTM A167
Stainless and heat resisting chromium-nickel steel plate, sheet and strip.
ASTM A176
Stainless and heat resisting chromium steel plate, sheet and strip.
ASTM A240M
Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and general applications.
ASTM A263
Corrosion resisting chromium steel clad plate, sheet and strip.
ASTM A264
Stainless chromium-nickel steel clad plate, sheet and strip.
ASTM A265
Nickel and nickel base alloy clad steel plate.
ASTM A666
Austenitic stainless steel sheet, strip, plate and flat bar for structural applications.
ASTM
General requirements for flat rolled stainless and heat resisting steel plate, sheet and strip.
A480/A480M

EN 10088-2
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes.
Higher austenitic

ASTM B625
UNS N08904 plate, sheet and strip.


Random Post

Diberdayakan oleh Blogger.

kinetasejati web

 
Support : PT.KINETA INTI SEJATI
Copyright© 2016. PT. Kineta Inti Sejati - All Rights Reserved

Proudly powered by Blogger